Grilling Another Portion - Gastroback DESIGN BBQ ADVANCED SMART Bedienungsanleitung

NOTE
Closing the lid reduces the required grilling time, ensures best grilling results, when
using the program mode, and saves energy. If the lid is left in the upright open
position, an acoustic signal sounds repeatedly. When leaving the lid open for
more than approx. 90 seconds, "OFF" appears on the upper line of the display
area. In this case, the grilling plate of the lid has been switched off. However, the
appliance keeps the set temperature for the grilling plate of the base, while the lid
is left open and any program keeps running quite normally. However, the required
grilling time could be somewhat longer, if the lid is left open.
5. When using the program mode, leave the appliance operate until the program
ran out and "150" flashes on the display area with an acoustic signal. When
using manual mode, you need to monitor the grilling cycle completely by your-
self. No matter, which mode you are using, you should check your food in time
for the desired doneness.
6. When your food is done, open the lid and remove your food via wooden or
plastic barbecue utensils.

Grilling Another Portion

IMPORTANT - There is no feature implemented for cooling down the grilling
plates. If you wish to operate the appliance further on after reducing the tempe-
rature setting, please keep in mind that the grilling plates may be still too hot for
your food. If required, leave the lid open and let the grilling plates cool down until
the heating indicator changes colour, before continuing your grilling session with
the next portion.
7. When using the manual mode, you may place the next portion of food onto
the grilling plates immediately. Additionally, you may change the temperature
directly (see: 'Changing the Settings During Operation').
8. When using the program mode, you need to cancel the program first by deac-
tivating the used mode (see the following step). Thereafter, set up the appliance
again, before placing the next portion onto the gilling plates.
9. Deactivating the currently used mode (program mode or manual): Touch any
program icon or the "manual" button for approx. 4 seconds. Thereafter, you can
set up the appliance again by selecting any program or the manual mode (see:
'Setting the Grilling Temperature').
67