Positioning The Lid - Gastroback DESIGN BBQ ADVANCED SMART Bedienungsanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

NOTE

If you do not touch any button for approx. 5 seconds after selecting a program,

the appliance cancels your selection and the program icons illuminate one by one

again.

IMPORTANT - Although the programs issue an acoustic signal, as soon as a useful

grilling time is reached, you should monitor the grilling cycle to avoid, that your

food gets burnt. For example: residues of sweet marinades burn easily during gril-

ling. If you wish to select the manual mode: Touch the "manual" button. The tem-

perature setting "150" and the "ok" button flash. When operating the appliance

with the lid closed, only the temperature for the base can be selected. When fol-

ding the lid back to the flat 180° position, two temperature values are displayed

and can be set differently.

7. Only manual mode - selecting the temperature: Touch the appropriate gril-

ling plate icon. Then, use the selection buttons "+" and/or "–" for selecting the

required value. For table top grilling, you can set up another temperature for the

other grilling plate or select "OFF" for switching off the grilling plate.

8. Starting the manual mode with the current settings: For starting at once, touch

the "ok" button. If you do not touch any button for approx. 5 seconds, the appli-

ance starts the heating cycle automatically. During pre-heating, the display area

flashes. Wait until the display area is illuminated continuously and an acoustic

signal sounds.

NOTE

Even during pre-heating, the smart temperature control switches the heating ele-

ments on and off, indicated via the heating indicator. This behaviour is a result

of the correct working of the temperature control. The set temperature is reached,

when the display area stops flashing and "RUN" (program mode) or the set tem-

perature (manual mode) is shown continuously.