Non-Stick Coating - Gastroback DESIGN BBQ ADVANCED SMART Bedienungsanleitung

NON-STICK COATING

The grilling surfaces of your »Design BBQ Advanced Smart« are provided with high
quality non-stick coatings. Even without using additional fat, food will not stick to the
coated surfaces. Some types of food may cause discolouration. This will not affect
the cooking performance.
Please adhere to the following hints:
• Before first use and each time after cleaning the grilling plates in an automatic
dishwasher: wipe the non-stick coatings of the grilling surfaces with a little coo-
king oil. Thereafter, there is no need to add any further oil.
• Do not use the grilling plates, if the non-stick coating is scratched, cracked or deta-
ched due to overheating. Contact your vendor for replacement. The grilling sur-
faces are intended exclusively for heating food. Do not place any foreign objects
(e.g. cups, dishes or cooking pots) on the grilling surfaces to avoid damage.
• Only use wooden or heat-resistant plastic cooking utensils with the appliance.
Do not use any hard or sharp-edged objects. Do not scratch, stir, or cut on the
non-stick coatings. We will not be liable for damage to the non-stick coating,
if unsuited utensils have been used or foreign objects have been placed on
the grilling plates.
• Do not use any oven cleaner or spray-on non-stick coatings with the appliance.
• The non-stick coatings of the grilling plates minimise the effort of cleaning. Do not
use corrosive or abrasive cleaners or hard, abrasive scouring utensils (e.g. metal
scourers, wire brushes). Even stubborn residues can be removed via a soft cloth
or nylon brush and warm dishwater or in the automatic dishwasher. For clea-
ning, always remove the grilling plates from the appliance first (see: 'Care
and Cleaning').
51