Maintenance; Safety; Preparation; Restarting - Optimum optimill MH25V Betriebsanleitung

5

Maintenance

In this chapter you will find important information about

Inspection

Maintenance

Repair
of the milling machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for

operational safety,

failure-free operation,

a long working life of the milling machine and

the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
5.1

Safety

WARNING!
The consequences of incorrectly executed maintenance and repair work can be:

extremely serious injuries to those working on the milling machine and

damage to the milling machine.
Maintenance and repair work on the milling machine must be carried out by qualified
technical personnel only.

5.1.1 Preparation

WARNING!
Only work on the milling machine if it has been disconnected from the power supply.

"Switching-off and securing the milling machine" on page 56
Attach a warning sign.

5.1.2 Restarting

Before restarting, run a safety check.

"Safety check" on page 55
WARNING!
Before starting the milling machine, it is essential that you ensure that this does not
constitute a risk to personal safety or damage to the milling machine.
Version 1.0.1 dated 2015-12-17 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
MH25V GB
Page 73