View Sunrise/Sunset Times - Conrad TE 857 Bedienungsanleitung

• Now "W" or "E" flashes. Use the "–" (6) or "+" (7) buttons to select if these are western ("W") or eastern ("E")
longitudes. Confirm the selections by pressing the "SET" button (2).
• "0:00 - TZ" flashes in the display. Adjust the time zone with the "–" (6) or "+" (7) buttons (+15 - -13 hours is possible):
Confirm the selections by pressing the "SET" button (2).
• "DST" and "NO" flash in the display. Here you may set if daylight savings time is to be applied, and which one should
be used.

For more information on this, see the appendix in chapters 21 and 22.
• Confirm the selections by pressing the "SET" button (2). Now the calculated sunrise and sunset times are
displayed.
 View Sunrise/Sunset Times
Here you may adjust the date to view the respective sunrise/sunset times. Proceed as follows:
• Press the "MEM" (3) button briefly. The date flashes.
• Use the "–" (6) and "+" (7) buttons to adjust the date. For a quick adjustment, hold the corresponding button for a
longer period of time.

During quick adjustment, the sunrise/sunset times are only displayed as dashes. They are only
calculated after the button is released.
• Press the "MEM" (3) button briefly to leave the display mode.
96