Viewing The Sunrise/Sunset Times - Conrad TE831X Bedienungsanleitung

• Now "W" or "E" blinks. With the button " " (6) or " " (7), select whether this is the western ("W") or eastern ("E")
degree of longitude. Confirm the setting by pressing the "SET" button (5).
• "0:00 - TZ" now blinks on the display. Enter the time zone with the button " " (6) or " " (7) (+15....-13 hours are
possible). Confirm the setting by pressing the "SET" button (5).
• "DST" and "NO" blink on the display. Here you have to set whether there is a change from daylight savings time
to normal time and which one is supposed to be used.

The appendix in chapter 21 and 22 contains more data.
• Confirm the setting by pressing the button "SET" (5). The calculated sunrise and sunset times appear now.
 Viewing the sunrise/sunset times
Here you can adjust the date to view the corresponding sunrise/sunset times. Proceed as follows:
• Briefly press the button "MEMORY" (3); now the date starts to blink.
• You can adjust the date with the button " " (6) or " " (7). For quick adjustment, keep the corresponding button
depressed for a longer period of time.

During quick adjustment, only lines appear on the display for the sunrise/sunset times. The times are
first calculated after releasing the button.
• Briefly press the button "MEMORY" (3) to quit the display mode.
83