Selecting Between Cutting And Grinding - struers Accutom-50 Gebrauchsanweisung

Selecting between
Cutting and Grinding
16
Accutom-50
Instruction Manual
To select between cutting and grinding you must be in the Main
Menu. As Accutom-50 always starts up in the same state as when
the voltage was switched of last time, it might be necessary to go
back to the Main Menu.
To go back to the Main Menu:
Esc Press Esc, until the MAIN MENU display appears.
(A long beep can be heard).

CUTTING METHODS
GRINDING METHODS
MANUAL FUNCTIONS
CONFIGURATION


Press MENU UP/DOWN


CUTTING METHODS and GRINDING METHODS.


Press ENTER

If you selected CUTTING METHODS, the
screen will appear as follows.
MAIN MENU

to select between

, to accept the selection.