Optimising The Grinding Results; Grinding Parameters; Consumables - struers Accutom-50 Gebrauchsanweisung

Optimising the Grinding
Results

Grinding Parameters

Recommended Grinding Parameters
Material
Ceramics, minerals
and crystals
Sintered carbides,
hard ceramics and
hard composites

Consumables

Accutom-50
Instruction Manual
Use the following table to select proper wheel and grinding
parameters according to the sample material.
Hardness Wheel Precision
High
M0P10
> HV 800 Medium
Low
High
B0P10
> HV 600
Medium
Low
Specification
Corrozip
Additive for Cooling Fluid
Environment friendly. To protect the machine
from corrosion and to improve cutting and
cooling qualities.
1 l
5 l
Cutting Fluid
Water free Cutting Fluid for cutting of water-
sensitive materials, 5 l
Feed speed X-increment No. of final
[mm/s] sweeps
0.1-0.2 5-10 µm 10
0.2-4.0 10-20 µm 5
4.0-8.0 20-30 µm 2
0.1-0.3 5-10 µm 10
0.3-0.5 10-20 µm 5
0.5-1.0 20-30 µm 2
Cat. No:
49900045
49900046
49900030
Wheel
speed
[rpm]
4000
4000
55