Technical Data - struers Accutom-50 Gebrauchsanweisung

Subject
Cutting
Positioning
Range
Sample Size
Cut-off Wheels
Cup Wheels
Recirculation
Cooling Unit
Motor
Safety Standard
Noise Level
Altitude
Surrounding
temperature
Humidity
Software and
Electronics
Power Supply
Dimensions and
Weight
58
Accutom-50
Instruction Manual

5. Technical Data

Specifications
Cutting Speed: 300-5000 rpm (adjustable in steps of 100 rpm)
Feed Speed: 0.005-3.000 mm/s (adjustable in steps of 0.005 mm/s)
Max. Positioning Speed: Y = 13 mm/s, X = 13 mm/s
Force Limits: LOW: approx. 20N; MEDIUM: approx. 40N; HIGH: approx.
60N
Y direction: 105 mm (precision 0.1 mm)
X direction: 60 mm (precision 0.005 mm)
Max. length of Cut-off Sample: 30 mm, 140 mm at ø20 mm
Max. length of Sample to be clamped: 225 mm
Max. Sample Cross Section:
ø127mm cut-off wheel and ø42mm flange:
ø152mm cut-off wheel and ø42mm flange:
Diameter: ø75 to ø152 mm / 3 to 6"
Max. Thickness: 2 mm / 0.08"
Hole: ø12.7 mm / 0.5"
Diameter: ø100 mm / 4"
Hole: ø 12.7 mm / 0.5"
Contents: 4 l
Flow: 800 ml/min
550 W at 5000 rpm
Please refer to the Declaration of Conformity
Approx. 65 dB (A) measured at idle running, at a distance of 1.0 m / 39.4"
from the machine.
Min. 50 m. below water level.
Max 3000 m above water level
5-40°C/41-104°F
0-95% RH non condensing
Display: 8 x 40 characters
Controls: touch pad
Database: 20 cutting methods + 10 grinding methods
PCB fuses: 3.15A , 1,6A SUB mini fuses
50-60Hz (max. load 2.7A)
Width
Depth
Height
Weight
ø40mm (without rotation)
ø80mm (with rotation)
ø50mm (without rotation)
ø100mm (with rotation)
Continuous Torque 0.8 Nm
1/3 x 220 - 240V
510 mm / 20"
700 mm / 27.6"
270 mm / 10.6"
45 kg / 99 lbs