Karl Storz D-LIGHT C Gebrauchsanweisung Seite 53

45
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and the
The D-LIGHT C model 20 1336 20-1xx is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or user of the unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the unit as recommended below, according to the maximum output power of the communications
equipment.
150 kHz to < 80 MHz
Rated maximum
output power of
⎡
=
transmitter
d
⎢ ⎣
[W]
0.01 0.12
0.1 0.38
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects
and people.
Appendix
Electromagnetic Compatibility
(EMC) Information
Table 206
D-LIGHT C model 20 1336 20-1xx
Separation distance d [m]
according to frequency of transmitter
80 MHz to < 800 MHz
⎤ ⎡ ⎤
3 5 . 3 5 .
=
P d
⎥ ⎦ ⎢ ⎣ ⎥ ⎦
3 3
0.12
0.38
1.2 1.2
3.8 3.8
12 12
Приложение
Указания по электромагнитной
совместимости (ЭМС)
800 MHz to 2.5 GHz
⎡
7
=
P d
⎢ ⎣
3
0.23
0.73
2.3
7.3
23
⎤
P
⎥ ⎦