Intended Use; Environmental Conditions - Ottobock 1C50 Taleo Gebrauchsanweisung

1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 3 (unrestricted
outdoor walker) and mobility grade 4 (unrestricted outdoor walk­
m°
kg
er with particularly high demands).
The table that follows shows the suitable spring stiffness of the prosthetic
foot, matching the patient's body weight and activity.
Spring stiffness relative to body weight and activity level
Body weight [kg]
up to 51
52 to 58
59 to 67
68 to 77
78 to 88
89 to 100
101 to 115
116 to 130
131 to 150

2.3 Environmental conditions

Allowable environmental conditions
Temperature range: –10 °C to +45 °C (14 °F to 113 °F)
Chemicals/liquids: fresh water, salt water, perspiration, urine, soapsuds, chlorine
water
Moisture: Submersion: max. 1 h in 3 m depth, relative humidity: no restrictions
Solids: Dust, occasional contact with sand
14
Normal activity High activity level
level
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
–