Service Life - Ottobock 1C50 Taleo Gebrauchsanweisung

Allowable environmental conditions
Clean the product after contact with humidity/chemicals/solids, in order to
avoid increased wear and damage (see Page 20).
Unallowable environmental conditions
Solids: Highly hygroscopic particles (e.g. talcum), continuous contact with sand
Chemicals/liquids: Acids, continuous use in liquid media
Storage and transport
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative humidity 20 % to
90 %, no mechanical vibrations or impacts

2.4 Service life

Prosthetic foot
Depending on the patient's level of activity, the service life of the product is
2 to 3 years.
Footshell, protective sock
The product is a wear part, which means it is subject to normal wear and
tear.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Unallowable combination of prosthetic components
Risk of injury due to breakage or deformation of the product
► Only combine the product with prosthetic components that are
approved for that purpose.
► Based on the instructions for use of the prosthetic components, verify
that they may be combined with each other.
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
15