Using The Blender Jug; Removing The Blender Jug; Markings Inside The Blender Jug; Using And Removing The Blade Assembly - Silvercrest MONSIEUR CUISINE ÉDITION PLUS Bedienungsanleitung

10. Using the blender
jug
NOTE: these user instructions describe the
basic functions such as mixing, chopping
and steaming. For information on the prepa-
ration of special dishes refer to the recipe
book.
10.1 Removing the blender
jug
The blender jug 5 can only be removed if
the lid 34 was opened.
1. Turn the lid 34 anticlockwise, until the
arrow of the locking system 12 points
to the open lock symbol.
2. Lift the blender jug 5 vertically upwards
out of the socket for the blender jug 9.
10.2 Markings inside the
blender jug
On the inside, the blender jug 5 is provided
with markings regarding the filling volume:
- Bottom marking: approx. 0.5 litres
- Marking I: approx. 1 litre
- Centre marking: approx. 1.5 litres
- Marking II: approx. 2 litres
- Top marking MAX: approx. 2.2 litres
corresponding to the maximum admissi-
ble filling volume
CAUTION:
When mixing liquids at speed 10 or
with button TURBO 20, the blender
jug 5 must not contain more than 1 litre,
since otherwise liquid may be ejected.
For speed settings of less than 10, the
blender jug 5 may only be filled up to a
maximum of 2.2 litres.
NOTE: For some applications, the blender
jug 5 should not contain an insufficient
amount of liquid, so that the device can func-
tion properly. Thus, for whipping cream, for
instance, you should use at least 200 ml and
when beating egg white use at least two
eggs.
10.3 Using and removing the
blade assembly
The blade assembly 29 is used to chop
food.
The blender jug 5 must never be used with-
out the blade assembly 29, since the blade
assembly 29 seals the blender jug 5 on the
bottom.
DANGER! Risk of injury from
cutting!
Please remember that the blades of the
blade assembly 29 are very sharp.
Never touch the blades with your bare
hands, to avoid cuts.
19
GB