Replacing The Blade Socket - Silvercrest MONSIEUR CUISINE ÉDITION PLUS Bedienungsanleitung

15.8 Replacing the blade
socket
If you process larger quantities than those
specified in these instructions (e.g. dough
with more than 500 g of flour), the blade
socket 10 can become so worn out that the
blade assembly 29 no longer turns correct-
ly.
If this happens, replace the blade socket 10
with a new one. Comply the specified max-
imum quantities in future.
Figure A: a spare blade socket 10 includ-
ing a silicone cover 36 is included with the
device as delivered.
You can also reorder this spare part (see
"How to order accessories" on page 36).
Removing the old blade socket
1. Press your thumb down on the silicone
cover 36 and simultaneously reach un-
der the rim of the old blade socket 10.
Pull the old blade socket 10 out up-
wards.
You may need to "wobble" it a bit be-
fore the blade socket 10 becomes loose
enough to be removed.
Inserting the new blade socket
2. Place the blade socket 10 onto the
drive axle. The recess in the blade sock-
et 10 needs to be inserted to match the
flattened sides of the drive axle. The
blade socket 10 clicks into place on the
drive axle.
• Insert the silicone cover 36 into the
blade socket 10.
31
GB