Cleaning The Blender - Silvercrest SKM 550 B3 Bedienungsanleitung

Cleaning the mixing bowl with lid, continuous shredder,
lid with pusher, mixer lid and all accessories
Clean all accessories, the mixing bowl with its lid 7, the blender lid 5
■
and measuring cup, the drive protection cover, the continuous shredder
8, its lid with the pusher e as well as the grating disc 9, the rotary
shredding disc 0 and the slicing disc w in warm water with a little deter-
gent. Any residues can be removed with a washing-up brush. Rinse all
parts with warm clean water and make sure that all parts are dry before
re-using them.
NOTE
The accessories, the mixing bowl with its lid 7, the blender lid 5
and measuring cup, the drive protection cover, the continuous
shredder 8 its lid with the pusher e as well as the grating disc
9, the rotary shredding disc 0 and the slicing disc w are also
suitable for cleaning in the dishwasher.
If you clean them in the dishwasher, please ensure that no plastic parts
►
are wedged too tightly between other objects. Otherwise, they may
become deformed!
If possible, place all plastic parts in the top basket of the dishwasher.
►

Cleaning the blender

WARNING! RISK OF INJURY!
Do not handle the blender blade with your bare hands.
►
Clean the blender 5 in warm water with a little mild detergent. After-
■
wards, rinse all parts with clean water so that no detergent residues re-
main.
In most cases, the following cleaning method is sufficiently hygienic if applied
right after use:
1) Put some water containing a little detergent into the fully assembled
blender 5.
2) Fit the lid with the measuring cup slightly offset and rotate it until the lid
clicks into place.
3) Switch on the blender 5 for a few seconds.
4) Pour out the washing water. Any residues can be removed with a wash-
ing-up brush.
5) Afterwards, rinse out the blender 5 with plenty of clean water, so that
all detergent residues are removed.
SKM 550 B3
GB │ IE │
21 ■