Using The Blender Jug - Silvercrest SKMH 1100 A1 Bedienungsanleitung

rapid chopping of nuts or small quantities of
herbs or onions, for example.
1. Press the "ON/OFF" button 11.
The speed symbol on the display will
flash.
2. Press the pulse button 9.
Notes:
— The pulse function can be used only
while no speed is selected.
— The speed is increased abruptly to its
maximum (level 10). The appliance
does not speed up gradually as when
you select the speed
Note:These user instructions describe basic
functions such as blending, chopping and
steaming. You can find details on preparing
specific recipes in the recipe book supplied.
7.1 Markings inside the blender jug
The blender jug 6 has markings on the
inside showing the volume of contents:
Lowest marking: 0.5 litre
6.9 Overflow
The receptacle 14 for the blender jug
incorporates an overflow hole 15.
If any liquid leaks out of the blender jug 6 it
using the
does not collect in the base unit 17, it drains
via the overflow hole 15 onto the underlay.

7. Using the blender jug

Highest marking: 2 litres, corresponding to
the maximum permissible contents.
Intermediate markings: 1.0 and 1.5 litres
Caution! When blending liquids on level
10 or using the pulse button 9, do not
exceed a quantity of 1 litre in blender jug 6,
otherwise liquid may spray out. At speeds
lower than 10, the blender jug may contain
up to 2 l.
Note: Certain operations require a
sufficiency of contents in the blender jug 6
for the appliance to function properly. For
example, when whipping cream always use
at least 200 ml, and when whisking egg
whites use at least two.
7.2 Inserting and removing the blade
The blender jug 6 may never be used
without the blade assembly 20 because the
regulator 12 (see "6.6 Setting the
speed" on page 86).
assembly
15
87