Using The Mixing Tools - Silvercrest SKM 600 B2 Bedienungsanleitung

7. Using the mixing
tools
Lifting up the drive arm
1. Press the unlock button 1 and fold up
the drive arm 12 until it engages and
the unlock button 1 pops out again.
Inserting the mixing bowl
2. Place the mixing bowl 5 into the base
unit 9 in such a way that the metal pins
on the lower edge fit into the recesses in
the base unit.
3. Lock the mixing bowl 5 by turning it to-
wards the closed lock symbol until it is
firmly seated.
Mounting the splash guard
CAUTION:
Never use the mixing bowl 5 without
the splash guard 11 attached. The ma-
terial you are mixing could otherwise
be ejected.
28 GB
4. Place the splash guard 11 onto the drive
arm 12 from below. The arrow () on
the splash guard 11 and the arrow ()
next to the open lock symbol on the drive
arm 12 point to one another.
5. Rotate the splash guard 11 in the direc-
tion of the closed lock symbol until it
clicks into place.
Inserting the mixing tool
6. Select the appropriate mixing tool:
- Dough hook 4: for heavy doughs,
e.g. bread dough
- Whisk 6: for whipping cream, egg
white etc.
- Beater 7: for medium to light dough
or batter, e.g. cake mix or pancake
batter.
For further information: see "Overview
of functions" on page 27.
7. Place the mixing tool 4/6/7 onto the
axle 13 from below.
Ensure that the metal pin on the axle 13
slots into the recess in the mixing tool.