Malfunctions, Cause, Remedy; Malfunctions During Operation - Silvercrest MONSIEUR CUISINE ÉDITION PLUS Bedienungsanleitung

16. Malfunctions, Cause, Remedy

If your device fails to function as required, please try this checklist first. Perhaps there is only
a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any circumstances.

16.1 Malfunctions during operation

Malfunction
Device does not start.
Blade assembly 29 not
turning.
Liquid underneath the
device
32 GB
Cause
Blender jug 5 is not posi-
tioned correctly
Lid 34 or deep steamer bas-
ket 3 have not been placed
correctly onto the blender
jug 5.
No power supply
Is the blade socket 10 worn
out? This can happen, for ex-
ample, if you have processed
too large a quantity of dough.
The blade assembly 29 has
not been inserted correctly so
that the blender jug 5 is leak-
ing.
Seal 28 for the blade assem-
bly is defective.
Liquid escaped from the
blender jug 5 flowing onto
the surface through the over-
flow hole 11 of the base
unit 13. (see "Overflow" on
page 18)
Remedy
Insert blender jug 5 correctly (see
"Insert blender jug" on page 20).
Place lid 34 or deep steamer bas-
ket 3 correctly.
Check mains plug 7, main
switch 6 and possibly the fuse.
Replace the blade socket 10 with
a new one (see "Replacing the
blade socket" on page 31) and
comply with the specified maxi-
mum quantities in future.
Insert blade assembly 29 correctly
(see "Using and removing the
blade assembly" on page 19).
Insert new seal 28 (see "Clean-
ing, checking and replacing seals"
on page 29).
When mixing liquids at speed 10
or with button TURBO 20, the
blender jug 5 must not contain
more than 1 litre, since otherwise
liquid may be ejected. For speed
settings of less than 10, the blend-
er jug 5 may only be filled up to a
maximum of 2.2 litres.