Insert And Remove The Mixer Attachment; Put On The Lid Of The Blender Jug - Silvercrest MONSIEUR CUISINE ÉDITION PLUS Bedienungsanleitung

10.5 Insert and remove the
mixer attachment
The mixer attachment 31 serves to combine
liquid foods, e.g. to whip cream, beat egg
white, emulsify (e.g. mayonnaise).
The mixer attachment 31 is put onto the
blade assembly 29:
- The wings of the mixer attachment 31 are
located in the spaces between the blades.
- For further notes: see "Functions in an
overview" on page 6.
CAUTION:
The mixer attachment 31 must only be
used with speed settings 1 to 4.
The button TURBO 20 must not be
pressed if the mixer attachment 31 is
used.
When using the mixer attachment 31,
the spatula 32 must not be used, since it
might get into the mixer attachment 31.
When adding food, ensure that it will
not block the mixer attachment 31.
In order to remove the mixer attachment 31,
pull it out upward.
10.6 Put on the lid of the
blender jug
The lid for the blender jug 34 can only be
placed on if the blender jug 5 was inserted
correctly.
1. Put the lid for the blender jug 34 slightly
twisted onto the blender jug 5.
The symbol of the opened lock points to
the arrow of the locking system 12.
2. Press and turn the lid 34 clockwise with
both hands until the closed lock symbol
points to the arrow of the locking sys-
tem 12.
Only when the lid 34 is correctly
closed, the device can start.
NOTES:
• In order to facilitate the closing of the lid
somewhat, put a few drops of oil on a
cloth and rub it on the seal 33.
• The device can only be started when the
lid 34 is put on correctly.
• To make the lid 34 properly lock in
place, it is helpful to press lightly on the
lock symbol while closing the lid.
• If the lid 34 has not been put
on correctly, the symbol
shown here on the right will
appear on the display 27.
• When the device is started, the lid 34 is
automatically locked, and the LED
15 is lit (see "Automatic lock" on
page 14).
21
GB