Herunterladen Inhalt Inhalt Diese Seite drucken

Use The Lid For The Filler Opening; Cooking And Steaming With The Cooking Pot - Silvercrest MONSIEUR CUISINE ÉDITION PLUS Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MONSIEUR CUISINE ÉDITION PLUS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10.7 Use the lid for the filler
opening
Simultaneously, the measuring beaker 35 is
used to close the lid of the blender jug 5 and
to measure ingredients.
• In order to close the blender jug 5,
place the measuring beaker 35 with the
opening at the bottom into the lid 34
and lock it in place by turning it clock-
wise.
CAUTION:
Prior to removing the measuring beak-
er 35, you must reduce the speed to set-
ting 1, 2 or 3, so that no food can be
ejected.
• In order to fill in ingredients, the measur-
ing beaker 35 can be removed briefly.
• To measure ingredients, turn the measur-
ing beaker 35 upside down and fill in
the food. The values can be read in ml
from the outside.
10.8 Cooking and steaming
with the cooking pot
1. Fill at least 500 ml of water into the
blender jug 5. Only fill so much water
into the blender jug 5 that the maximum
filling volume of 2.2 litres will not be ex-
ceeded when the food is added.
- If the entire food is covered by water,
it will be cooked.
- If the food is not completely covered
by water, it will be steamed.
2. Fill food into the cooking pot 30.
NOTE: Always make sure that the filling lev-
el does not exceed the marking MAX.
3. Place the cooking pot 30 into the blend-
er jug 5.
4. Close the blender jug 5 with the lid 34
and the measuring beaker 35.
22 GB
5. Use the main switch 6 to switch on the
device.
6. Use the timer
time.
7. Use the temperature controller  17 to
set the desired temperature, e.g. 100 °C
for cooking.
The display 27 shows the time set and the
selected temperature.
8. Select the speed setting 1 for an even
distribution of the heat in the water.
9. Press the button START/STOP 19. The
device starts to operate.
10.After the set time has elapsed, the de-
vice stops and the illumination of the
button goes off.
11.After several seconds, the LED
goes out and an audio signal sounds.
The device can be opened.
12.Press the main switch 6 to switch off the
device.
 26 to set the desired
 15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Skmk 1200 d4

Inhaltsverzeichnis