Receiving A Group Call In Idle; Private Call - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

Feature User Guide
Procedure Steps
Press and hold the PTT button.
1
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.

3.4.4 Receiving a Group Call in Idle

Procedure Steps
1 The radio receives a Group Call.
The incoming Group Call is signalled by a Receiving Group Call tone.
To respond, press and hold the PTT button.
2

3.4.5 Private Call

The Private Call, also called point-to-point, or individual call, enables calling between two individuals. No other
radio can hear the conversation. This call type can be carried out in two ways:
• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy indication. The
radios are identified using its radio numbers.
3-10 -