Setting Default Vibrate; Setting Detail Vibrate; Ring Style - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

5.8.1.1 Setting Default Vibrate

Procedure Steps
1 From the home screen, press MENU key.
2 Select Setup → Vibrate.
Select one of the following:
3
• Vibe then Ring
• Vibe Only
• Ring Only

5.8.1.2 Setting Detail Vibrate

Procedure Steps
1 From the home screen, press MENU key.
Select Setup → Vibrate → Details....
2
3 Select one of the following:
• Duplex Calls — Sets the vibrate settings to Phone, PABX, and Duplex Private calls.
• Simplex Calls — Sets the vibrate settings to Simplex Private Calls.
• Group Call — Sets the vibrate settings to Group Calls.
• Messages — Sets the vibrate settings to status messages and text messages.
4 Select the required setting, and press Select.
If you choose Duplex Calls, Simplex Calls or Messages, the settings available are Vibe then Ring (for
messages it is Vibe & Ring), Vibe Only or Ring Only. If you choose Group Call, the settings available
are Vibe On or Vibe Off only.

5.8.2 Ring Style

This sub-menu allows you to set the incoming call ring style.
-
5.8.1.1 Setting Default Vibrate
5-31