Setting Scan Lists - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

Procedure Steps
From the home screen, press MENU key.
1
2 Select More . . . → Group Setup → Scan → Active List.
If Scanning is Off is displayed, go to More . . . → Group Setup → Scan → Scanning → On to
enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
Select one of the following:
5
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.

5.9.1.3 Setting Scan Lists

When and where to use:
If you want to set up any scan list.
-
5.9.1.3 Setting Scan Lists
5-55