Sending A Targeted Status Message; Contacts - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

5.4.8.4 Sending a Targeted Status Message

Procedure Steps
From the home screen, press MENU key.
1
2 Select Messages → Send Status.
Do one of the following:
3
• Highlight the required status message and press Select, the PTT button, or the SEND key.
• Enter 5 digit status message number and press Send.
If the radio displays Status list is empty, you can enter 5 digit status message and press SendTo.
Do one of the following:
4
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select required talkgroup from the TalkGroup List.
Result:
The display shows on of the following delivery reports:
• Status Sent.
• Status Failed.

5.5 Contacts

This sub-menu stores all your contact numbers. Each entry requires the following information:
• Name — if you store more than one number to one contact, this entry is required.
• Type — each contact must be assigned to one of the following types:
Table 5-5 Contact Types
Contact Icon
-
Description
Private
Cannot have a speed dial number.
Mobile
Home
Work
PABX
5.4.8.4 Sending a Targeted Status Message
5-19