Call-Out Modes Interaction; Call-Out Service Phases; Voice Operating Transmission (Vox) Control - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

Feature User Guide

6.12.2 Call-Out Modes Interaction

Call-Out feature operation is different in other modes:
• TXI Mode — you can read the message but you cannot respond to it. You have an option to leave the TXI
Mode by pressing soft key or reject the Call-Out message.
• DMO Mode — Call-Out is not supported.
• Emergency Mode — all Call-out alerts are ignored.

6.12.3 Call-Out Service Phases

In the Call-Out mode there are following phases:
• Alerting phase — receives a Call-Out message. The alarm tone indicates the message. Text is displayed
and you have following options to use: Accept, Reject or MENU. If you accept the alert, no other service
from this point can interrupt.
You can stop the alert tone by pressing PTT or any of the soft keys.
• Information phase — you are still in the Call-Out mode and you can receive more detail information about
the incident that occurred through subsequent text or the voice message. You can query for more information
using voice group call or Call-Out text function which enables you to send a text message. You can always
respond and send back the text or the voice message using voice group call.

6.13 Voice Operating Transmission (VOX) Control

Voice Operating Transmission (VOX) Control feature allows you to transmit voice in a hands-free condition. If
this feature is enabled and the loud speaker is turned on, your radio activates the microphone when you speak and
deactivates it when you are silent. It is used during either a Duplex Private Call or a Phone Call, when a currently
connected and active accessories are not Full Duplex capable.
Example:
An external speaker is turned on with a fist microphone activated.
6-18 -