Making A Phone Or Pabx Call; Phone/Pabx Speed Dial; Using Phone/Pabx Speed Dial; Ms-Isdn - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

6.4.1 Making a Phone or PABX Call

Procedure Steps
1 From the home screen, enter the number.
If Phone or PABX are not the first type of call presented, press Ctype repeatedly to select it.
2
3 Press SEND key.

6.5 Phone/PABX Speed Dial

This feature allows you to dial Phone/PABX by a shortened number of up to three digits instead of the full number.
The Phone/PABX Speed # number is assigned when the dialed number is added in the contact list.
This feature is available only in TMO Mode.

6.5.1 Using Phone/PABX Speed Dial

Procedure Steps
From the home screen, enter the predefined Phone/PABX speed dial number and # key.
1
2 Press SEND key.

6.6 MS-ISDN

This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address the call, send the
message or pre-defined templates. It works for both simplex and duplex calls, based on the assigned ISDN number.

6.7 DTMF Overdial

This feature allows you to communicate with an automated answering device (for example, the voice mail or
answering machine) during an on-going private, phone or PABX call.
While in an on-going private, phone or PABX call, press the DTMF keys (0-9, *, #). When pressed, the DTMF key
sounds a tone and the entered digit is displayed on the screen.
-
6.4.1 Making a Phone or PABX Call
6-3