Initializing Disaster Alert Call; Silent Emergency Mode - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

This call stays clear only, even if any of the encryption services are enabled. The only exception is the
E2E Encryption feature.
Your service provider defines if the Disaster Alert Call is initiated on a predefined talkgroup.

3.6.13 Initializing Disaster Alert Call

Procedure Steps
From the home screen, press MENU key.
1
2 Select More . . . → Services → Disaster Alert.
Step result: Your radio enters Disaster Alert Mode and it displays Disaster Alert icon.
To start the call press PTT.
3
Step result: Your radio displays Disaster AlertIn Use.

3.6.14 Silent Emergency Mode

The Silent Emergency Mode is a type of emergency services that provides no audible indications and no keypad
tones at the entrance. All the display indications are as in the idle mode. However, the radio cannot use any
services except for:
• Receiving Ambience Listening
• Sending Silent Emergency Alarms
• Sending GPS location reports
If you try to activate any other feature, it is blocked and no indication is displayed.
If the Silent Emergency feature is enabled, the radio enters Silent Emergency Mode on pressing the EMERGENCY
button. After entering the Silent Emergency Mode, the radio guarantees itself to be in TMO Mode. The radio
stays in TMO Mode or switches to it, depending on the actual state. Once in TMO Mode, the radio sends Silent
Emergency Alarm.
If the radio is in a private or group call, the radio waits until the call ends and then enters the Silent
Emergency Mode.
-
3.6.13 Initializing Disaster Alert Call
3-19