Application Instructions; Device Description - HBM PACEline CMD600 Bedienungsanleitung

CMD600
2

Application instructions

The CMD600 is a single channel charge amplifier for piezoelectric sensors.
It converts a sensor's measurement signal (consisting of electric charge) into
a proportional " 10VDC voltage signal.
The compact design amplifiers have good immunity from interference. All
electric signals are galvanically isolated. Therefore, no insulating elements are
required for safe operation.
The specifications list the permissible limits for mechanical, thermal and
electrical stress. It is essential that these are taken into account when
planning the measuring set-up, during installation and ultimately, during
operation (see chapter 11 "Tips regarding piezoelectric measurement
technology").
IEPE/ICP sensors (current−fed piezoelectric transducers) cannot be used with
the CMD600.
3

Device description

Digital input/output
− Digital input 1
− Digital output 1 and 2
Ethernet system interface
A2781−2.1 en/de/fr
System input/output
− CMD600 voltage supply
− RESET/MEASURE signal
− Analog output "10 V
− TEDS
− SensorTeach
Sensor connection
System LED
11