Component Review - Dibo SBH-G-D Bedienungsanleitung

1 burner switch (with led)
2 main switch
3 sight glass gas burner control
4 gas valve indication
5 theromostat (temperature
regulator)
6 reset button with indicator lamp
1
4

COMPONENT REVIEW

1 M OTO R
The type of motor depends of the type of machine (see "Technical data" on
page 61 ).
2 M A N O M E T E R
on the manometer one can read the pressure.
3 B U R N E R
The type of burner depends on the type of machine.
4 H I G H P R E S S U R E P U M P
The type of hp- pump depends on the type of machine (see "Technical data"
on page 61 ).
5 P LU G / S O C K E T
The implementation of the plug/socket is country dependent. The machine
is provided from the factory without plug. The DiBo dispenser will install the
correct plug for delivery.
6 C H E M I C A L S I N J E C T I O N
The machine is provide with an injector to add chemicals to the water. It
is enough that the suction hose, at the back of the machine, hangs in the
chemicals tank to under the fluid level. By adjusting the mixing valve, the
sucked in quantity becomes regulated. at the end of the works, let the injector
some time suck in pure water to rinse the system sufficiently.
7 F U E L TA N K
The fuel tank can become filled by removing the capsule to the front of the
control panel. The tank is provide with a breather tube, suction pipe and a
return circuit at the top.
DiBO 17
2
3
6
5
E N
o p E R aT I o n