3.3. Component review
1. Motor
The type of motor depends on the type of machine (see technical data).
For maintenance and service of the engine DiBO advises you to read the guide attached with the engine.
All service and maintenance are described in the attached annex of the engine.
2. Manometer
On the manometer one can read the pressure.
3. High pressure pump
The type of high pressure pump depends on the type of machine (see technical data).
4. Fuel tank
The fuel tank can become filled by removing the fuel capsule (To the left is loose).
There can be refuelled at a petrol station or with a Jerry can.
Tank the correct and pure fuel. Pay attention on this especially at the use of jerrycan!
There can be used exclusively the obligatory fuel. Check the jerrycan on clogging.
DiBO n.v. 49