Cleaning And Servicing The Blade Knife Bar; Replacing The Hand Protection; Storage; Wall Bracket - Parkside PHS 600 A1 Originalbetriebsanleitung

GB MT
impact protection (
ing.
• Keep the ventilation slots (
motor housing of the device clean. Use
a damp cloth or a brush to do this. Do
not wash down the equipment with wa-
ter, or submerge it in water.
Cleaning and servicing the
blade knife bar
Clean the cutter bar (2) carefully after each
use. After using the equipment, it is impera-
tive to:
- Clean the blade (with an
oily cloth);
- Oil the blade shaft with
an oil can or spray.
Replacing the hand
protection
Loosen the two screws on the hand pro-
tection (3) with a screwdriver. Replace
the damaged hand protection (3). Fasten
the new hand protection (3) with the two
screws.

Storage

• Clean the equipment before putting it
away.
• Keep the trimmer in the blade protec-
10) supplied, in a dry place
tion (
and out of reach of children.

Wall bracket

You can hang the motor part on the wall
with the keyhole bore (11) on the bottom
of the device.
46
1) needs replac-
5) and
• Using dowels, place one screw at the
desired position on a wall.
• The screw head can have a diameter
of 7 - 10 mm.
• Leave the screw head protruding at a
distance of approx. 10 mm from the
wall.
• You can place the device onto the
screw using the opening on the bottom
and pull the device down until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Waste Disposal and En-
vironmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be dis-
posed of for free.