Herunterladen Inhalt Inhalt Diese Seite drucken

Use; Switching On/Off; Working With The Hedge Trimmer; Use Of The Machine - Parkside PTHSA 20-Li B3 Originalbetriebsanleitung

Akku-teleskop-heckenschere 20 v
Vorschau ausblenden Andere Handbücher für PTHSA 20-Li B3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22

Use

NOTE
Comply with regulations regarding noise
protection and local rules. Using the appli-
ance on certain days (e.g. on Sundays and
public
holidays), during certain times (midday,
night time) or in certain locations (e.g. health
resorts, clinics, etc.) may be restricted or
prohibited.
Switching on/off
Turn on
Press the safety lock-out 0 and keep it pressed
and then press the On/Off switch q. You can
now release the safety lock-out 0.
Switching off
Release the On/Off switch q.

Working with the hedge trimmer

Use of the machine

NOTE
Please note that legal restrictions in your
country may limit your use of the hedge
trimmer.
Inspect the hedge trimmer daily before every
use. Also check the appliance after knocks
and drops to identify any significant damage
or defects.
Wear sturdy shoes and snug-fitting clothing to
reduce the risk of accidents. Stand firmly on
the ground, pay attention to your balance
and always use the supplied shoulder strap!
For the sake of your health, take regular
breaks while working. Physical fatigue
increases the risk of injury!
WARNING!
Never use the appliance when you are tired
or ill or under the influence of alcohol or
other drugs or medications.
PTHSA 20-Li B3

Cutting techniques

See fold-out page (figure A).
NOTE
Remove thicker branches with a branch
cutter.

Transport

Use the blade guard 1 when transporting the
appliance.
Ensure that the appliance cannot switch on
during transport.

Maintenance and cleaning

The motor unit must always be kept clean, dry
and free from oil or grease.
The hedge trimmer must be cleaned of sawdust
at regular intervals.
Use a soft, dry cloth to clean the housing.
Check the hedge trimmer for loose screws on
the cutter bar 2 and tighten them if necessary.
Remove stuck cuttings.
Maintain the cutter bar 2 using a spray oil or
an oil can.

Storage

Always clean the appliance thoroughly before
storing.
Store the appliance in the supplied blade
guard 1 in a dry place and out of the reach
of children.
Store the appliance horizontally or secured
against falling.
GB │ IE
 11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis