Working With The Hedge Trimmer; Use Of The Machine; Cutting Techniques; Transport - Parkside PTHSA 20-Li B3 Originalbetriebsanleitung

Working with the hedge trimmer

Use of the machine

NOTE
► Please note that legal restrictions in your
country may limit your use of the hedge
trimmer.
► Inspect the hedge trimmer daily before every
use. Also check the appliance after knocks
and drops to identify any significant damage
or defects.
► Wear sturdy shoes and snug-fitting clothing to
reduce the risk of accidents. Stand firmly on
the ground, pay attention to your balance
and always use the supplied shoulder strap!
► For the sake of your health, take regular
breaks while working. Physical fatigue
increases the risk of injury!
WARNING!
► Never use the appliance when you are tired
or ill or under the influence of alcohol or
other drugs or medications.

Cutting techniques

■ See fold-out page (figure A).
NOTE
► Remove thicker branches with a branch cutter.
PTHSA 20-Li B3

Transport

■ Use the blade guard 1 when transporting
the appliance.
■ Ensure that the appliance cannot switch on
during transport.

Maintenance and cleaning

■ The motor unit must always be kept clean, dry
and free from oil or grease.
■ The hedge trimmer must be cleaned of sawdust
at regular intervals.
♦ Use a soft, dry cloth to clean the housing.
♦ Check the hedge trimmer for loose screws on
the cutter bar 2 and tighten them if necessary.
♦ Remove stuck cuttings.
♦ Maintain the cutter bar 2 using a spray oil or
an oil can.

Storage

■ Always clean the appliance thoroughly before
storing.
■ Store the appliance in the supplied blade
guard 1 in a dry place and out of the reach
of children.
■ Store the appliance horizontally or secured
against falling.
Troubleshooting:
hedge trimmer
Problem Possible cause
Motor head not
Motor
mounted correctly
will not
Battery not inserted
start.
or not charged
Troubleshooting
Check
assembly
Charge and/or
insert battery
GB │ IE │ 11 ■