KCI V.A.C. SIMPLACE DRESSING Anwendungsanweisungen Seite 18

V.A.C. SImpLACE™ EX drESSING - V.A.C.
®
CAuTIoN: Patient's skin condition should be carefully monitored (refer to Precautions, Protect
Periwound Skin section).
fig. 13
1. Trim and place the V.A.C.
3 - 5 cm border of intact periwound tissue (fig. 10). Drape may be cut into multiple pieces
for easier handling, retaining a portion of the Blue Handling Tab on each piece. Use any
excess drape to seal diffi cult areas, if needed.
2. Partially pull back one side of Layer 1 to expose adhesive (fig. 11). Be sure to hold Layer 1
fl ap back to prevent readherence to drape.
3. Place the adhesive face down over foam and apply drape to cover foam and intact skin,
ensuring drape covers at least a 3 - 5 cm border of intact periwound tissue (fig. 12).
4. Remove remaining Layer 1 backing material and pat drape to ensure an occlusive seal.
5. Remove green-striped stabilization Layer 2 (fig. 13).
6. Remove perforated Blue Handling Tabs from drape (fig. 14).
fig. 10 fig. 11
Drape to cover the foam dressing and an additional
®
drApE AppLICATIoN
®
fig. 12
fig. 14
18