KCI V.A.C. SIMPLACE DRESSING Anwendungsanweisungen Seite 16

3. Gently place foam into wound cavity, ensuring contact with all wound surfaces. Carefully cut
or tear away any excess V.A.C.
Spiral GranuFoam™ Dressing into any area of the wound.
NoTE: Ensure foam-to-foam contact between adjacent pieces of foam for even distribution
of negative pressure.
NoTE: Superficial or retention sutures should be covered with a single layer of non-
adherent material placed between the sutures and the V.A.C.
Dressing.
4. Note the total number of pieces of foam used in the wound and document on the supplied
Foam Quantity Label on the V.A.C.
Quantity Label can be peeled off the V.A.C.
that can be seen by the next treating clinician (placed around the SensaT.R.A.C.™ tubing, on
the V.A.C. Drape / 3M™ Tegaderm™ Dressing, in the patient's chart, etc.)
®
Spiral GranuFoam™ Dressing (fig. 4). Do not force V.A.C.
®
Ruler (fig. 5) and in the patient's chart. The Foam
®
Ruler (fig. 6) and should be placed in an area
®
16
Drape / 3M™ Tegaderm™
®
®