KCI V.A.C. SIMPLACE DRESSING Anwendungsanweisungen Seite 17

V.A.C. SImpLACE™ drESSING -
®
3m™ TEGAdErm™ drESSING AppLICATIoN
fig. 7
CAuTIoN: Patient's skin condition should be carefully monitored (refer to Precautions, Protect
Periwound Skin section).
1. Trim the 3M™ Tegaderm™ Dressing to cover the V.A.C.
additional 3-5 cm border of intact periwound tissue (fig. 7). The 3M™ Tegaderm™ Dressing
may be cut into multiple pieces for easier handling. Excess 3M™ Tegaderm™ Dressing may
be kept to seal diffi cult areas, if needed.
2. Carefully remove Layer 1 to expose adhesive (fig. 8). The 3M™ Tegaderm™ Dressing may
be held by the Ruler / Handling Bars.
3. Place the adhesive face down over foam and apply 3M™ Tegaderm™ Dressing to cover
foam and intact skin, ensuring 3M™ Tegaderm™ Dressing covers at least a 3-5 cm border of
intact periwound tissue.
4. Remove Layer 2 and pat 3M™ Tegaderm™ Dressing to ensure an occlusive seal (fig. 9).
Layer 1
fig. 8
17
fig. 9
Spiral GranuFoam™ and an
®
Layer 2