Connection To An Existing Wireless Lan Network; Operation As A Wireless Access Point; Service Functions; Specifications - IMG STAGELINE DELTA-160 Bedienungsanleitung

7.8.1 Connection to an existing wireless LAN network

1) Under "Wi-Fi", tap the switch displayed on the screen so that
"ON" will be indicated� A search for available wireless LAN net-
works will start� The networks found will be listed together with
their signal strength�
2) Select the corresponding network from the list and tap "Connect"�
3) Enter the password required from the network and confirm with
"OK"� The password will be saved to the mixer for future connec-
tions� The network name will be green after successful connection�
The IP address assigned to the mixer will be indicated in the menu
view "Setup" (fig� 26)�
Further options:
– "Refresh" will start a new search for wireless LAN networks
– "Forget" will delete the password for the network selected from
the memory
4) To exit the wireless LAN mode, tap the switch displayed on the
screen underneath "Wi-Fi" so that "OFF" will be indicated�

7.8.2 Operation as a wireless access point

1) Tap the switch displayed on the screen underneath "AP | Hotspot"
so that "ON" will be indicated�
2) Define the network name in the field underneath "SSID"�
3) To protect the network by password, tap the switch displayed on
the screen next to "Password" so that "ON" will be indicated�
Enter the corresponding password in the field underneath "Pass-
word"�
4) Tap "Save" to save the settings made�
5) To exit the wireless LAN mode, tap the switch displayed on the
screen underneath "AP | Hotspot" so that "OFF" will be indicated�

7.9 Service functions

The functions "Update from USB", "Toggle Dev Mode", "Save Log"
and "Android Home Screen" in the setup menu "Setup ➾ System
Maintenance" are for service purposes and are not described in this
manual�
46

8 Specifications

Inputs
Sensitivity/ impedance; connection
Mic: � � � � � � � � � � � � � � � � 0�4 mV/1�5 kΩ; XLR, balanced
4 V max�
Line 1––12: � � � � � � � � � � 3 mV/10 kΩ; 6�3 mm jack, balanced
7 V max�
Line ST 1/ 2: � � � � � � � � � � � 8 mV/2 kΩ; 6�3 mm jack, balanced
4 V max�
Phantom power: � � � � � � � � +48 V for Mic 1 – 12, to be activated individually
Digital input: � � � � � � � � � � � RCA, unbalanced
Outputs
OUT 1– 8
Rated level: � � � � � � � � � � 700 mV
Connection: � � � � � � � � � � XLR, balanced
Headphones H�P: � � � � � � � � 6�3 mm jack, stereo, unbalanced, for headphone
impedance > 8 Ω
MONITOR
Rated level: � � � � � � � � � � 700 mV
Connection: � � � � � � � � � � 2 × 6�3 mm jack, balanced
Digital outputs
S/PDIF: � � � � � � � � � � � � � � RCA, unbalanced
AES/EBU: � � � � � � � � � � � � XLR, balanced
Noise gates
Threshold: � � � � � � � � � � � � � −56 ... +24 dBu
Attack: � � � � � � � � � � � � � � � 0�5 ... 100 ms
Hold: � � � � � � � � � � � � � � � � � 2 ms ... 2 s
Release: � � � � � � � � � � � � � � 2 ms ... 2 s
Depth: � � � � � � � � � � � � � � � � 0 ... 80 dB
Compressors
Threshold: � � � � � � � � � � � � � −56 ... +24 dBu
Attack: � � � � � � � � � � � � � � � 0�5 ... 100 ms
Release: � � � � � � � � � � � � � � 20 ms ... 5s
Compression ratio: � � � � � � 1 : 1 ... 20 : 1
Gain: � � � � � � � � � � � � � � � � � −12 ... +12 dB
High-pass filter
Cut-off frequency: � � � � � � � 16 Hz ... 400 Hz
Parametric equalizers
2 bell filters
1 bell filter or low-shelf filter
1 bell filter or high-shelf filter
Frequency: � � � � � � � � � � � 20 Hz ... 20 kHz
Gain: � � � � � � � � � � � � � � � −18 ... +18 dB
Quality factor Q: � � � � � � � 0�5 ... 10
Graphic equalizers
Frequency bands: � � � � � � � 31 fixed frequencies 20 Hz ... 20 kHz
Gain: � � � � � � � � � � � � � � � � � −18 ... +18 dB
Crossover network
High-pass filter and low-pass filter
Cut-off frequency: � � � � � � 40 Hz ... 300 Hz
Slope: � � � � � � � � � � � � � � � 24 dB/octave
Signal delay
Input channels: � � � � � � � � � 0 ... 200 ms
Signal buses: � � � � � � � � � � � 0 ... 200 ms
Sum channel: � � � � � � � � � � 0 ... 200 ms
Digital signal processing
Signal processor type: � � � � 40 bit, floating-point arithmetic
A /D converter: � � � � � � � � � � 24 bit
D /A converter: � � � � � � � � � � 24 bit