Protection Against Change Of Configuration; Wireless Lan Mode; Connection To An Existing Wireless Lan Network; Operation As A Wireless Access Point - IMG STAGELINE DELTA-160R Bedienungsanleitung

7.7 Protection against change of configuration

A password protection can be set up to prevent unauthorized change
of essential settings� Basic operation (e� g� volume adjustment) will still
be possible, but configuration settings can only be made when the
password has been entered�
1) Press the key SETUP (4) to call up the setup menu�
2) Tap the button "Setup" on the left to call up the view for various
system settings (fig� 26)�
3) Under "System", tap the button "Maintenance"� A view with
various system functions will appear�
4) Tap the button "UI Lock"� A message will appear prompting you
to enter a password�
5) Use the keyboard appearing on the screen to enter a password
and make sure to remember it!
6) Tap "Lock UI" to confirm or "Cancel"�
7) Press the key BACK (4) to exit the setup maintenance submenu�
To deactivate the password protection, press the key BACK and enter
the password�

7.8 Wireless LAN mode

A wireless LAN adapter in the shape of a USB plug is supplied with the
mixer� This will allow you to connect the mixer to an existing wireless
LAN network or to use it as a wireless access point (AP) to set up your
own wireless LAN network� The mixer can then be remotely controlled
by means of suitable software�
To set up the wireless LAN:
1) Connect the wireless LAN adapter to one of the two USB ports (5)�
2) Press the key SETUP (4) to call up the setup menu�
3) Tap the button "Setup" on the left to call up the view for various
system settings (fig� 26)�
4) Under "System", tap the button "Setup Wifi"� The view "Wi-Fi"
(fig� 35) will appear�
5) When the wireless LAN interface has been set up, press the key
SETUP to exit the setup menu�
Setup
Wi-Fi
Patch
Refresh
ON
Meter
My_Net
Neighbour's_Net
FX
Scenes
Recorder
Monitor
Fig. 35 Wireless LAN settings
2019/08/23
07:50:01
Wi-Fi
AP | Hotspot
OFF Save
Forget
SSID
Password
Connect OFF

7.8.1 Connection to an existing wireless LAN network

1) Under "Wi-Fi", tap the switch displayed on the screen so that
"ON" will be indicated� A search for available wireless LAN net-
works will start� The networks found will be listed together with
their signal strength�
2) Select the corresponding network from the list and tap "Connect"�
3) Enter the password required from the network and confirm with
"OK"� The password will be saved to the mixer for future connec-
tions� The network name will be green after successful connection�
The IP address assigned to the mixer will be indicated in the menu
view "Setup" (fig� 26)�
Further options:
– "Refresh" will start a new search for wireless LAN networks
– "Forget" will delete the password for the network selected from
the memory
4) To exit the wireless LAN mode, tap the switch displayed on the
screen underneath "Wi-Fi" so that "OFF" will be indicated�

7.8.2 Operation as a wireless access point

1) Tap the switch displayed on the screen underneath "AP | Hotspot"
so that "ON" will be indicated�
2) Define the network name in the field underneath "SSID"�
3) To protect the network by password, tap the switch displayed on
the screen next to "Password" so that "ON" will be indicated�
Enter the corresponding password in the field underneath "Pass-
word"�
4) Tap "Save" to save the settings made�
5) To exit the wireless LAN mode, tap the switch displayed on the
screen underneath "AP | Hotspot" so that "OFF" will be indicated�

7.9 Service functions

The functions "Update from USB", "Toggle Dev Mode", "Save Log"
and "Android Home Screen" in the setup menu "Setup ➾ System
Maintenance" are for service purposes and are not described in this
manual�
X
45