Exporting All Settings; Importing All Settings; Additional Functions; Assigning Channel Names, Changing The Channel Colour - IMG STAGELINE DELTA-160 Bedienungsanleitung

5.8.4 Exporting all settings

To save all settings of the mixer including all scenes listed to an
external memory:
1) Press the key SETUP (5) to call up the setup menu�
2) Tap the button "Setup" on the left to call up the view for various
system settings (fig� 26)�
3) Under "System", tap the button "Maintenance"� A view with
various system functions will appear�
4) To save all settings to a USB storage device connected to a USB
port (3), tap the button "Export Settings"� Confirm the security
prompt with "Export" or cancel with "Cancel"�
When the settings have been successfully exported, "Export suc-
cessful" will briefly appear�
5) Press the key BACK (5) to exit the system submenu "Maintenance"�
Information
Setup
System Version:
Apk: V1.6.1
Patch 1.3.0 -5B 0.662V
Serial: 000000000000090c
Meter
IP Address:
IP Address:
FX
Brightness
Scenes
Recorder
Monitor
Fig. 26 Menu "Setup"

5.8.5 Importing all settings

To import all settings of the mixer previously saved to a USB storage
device via the function "Export Settings" of the system submenu
"Maintenance":
1) Press the key SETUP (5) to call up the setup menu�
2) Tap the button "Setup" on the left to call up the view for various
system settings (fig� 26)�
3) Under "System", tap the button "Maintenance"� A view with
various system functions will appear�
4) Connect the USB storage device containing the export file to one
of the USB ports (3)�
5) Tap the button "Import Settings", select the corresponding file and
confirm the security prompt with "Import" or cancel with "Cancel"�
The mixer will switch off and restart with the loaded settings�
42
Sample Rate
48.0 kHz
44.1 kHz
aa3798d700000000
Delay Unit
ms ft m
Crossover
BUS8 Master LR
IN IN
80.0 Hz 80.0 Hz

6 Additional Functions

6.1 Assigning channel names,
changing the channel colour
Names can be assigned to all channels (inputs, signal buses and ste-
reo sum) to make it easier to distinguish the channels� The individual
names will appear in the channel strips and in the channel selection
field of the individual views� In the default settings, the usual channel
name (e� g� CH 1, Bus 5, L / R MIX OUTPUT) will appear� For the input
channels and signal buses, the colour of the name field can also be
changed� To assign a name or to change the colour of a channel:
1) Press the keys IN 1– 8/9 – 20 (13) to call up the overview of input
channels or press the key BUS 1– 8 (13) to call up the overview of
signal buses� To rename the sum channel, call up the view for the
stereo sum: Press the key SEL next to the fader M (14) and proceed
with step 3�
2019/08/23
X
07:50:01
2) Select the corresponding channel�
System
3) Keep your finger on the channel name with a coloured background
for a few seconds� When you remove your finger, a keyboard will
Maintenance
appear on the screen�
4) Use this keyboard to enter a new name for the channel�
Setup Wifi
The button "?123" is used to switch over the keyboard to special
characters and numerals� The button  is used to delete the
character on the left of the cursor�
5) To exit the input mode, tap "Done"� The keyboard will disappear�
6) Select a different background for the name if required� It is not
possible to change the colour for the sum channel�
7) Tap "Confirm" or "Cancel"�

6.2 Test signal generator

The mixer has its own signal generator which can, for example, be
used to test speakers� The signal generator can also be used as a signal
source for the real-time analyzer which is a tool to adjust the graphic
equalizers (effect modules GEQ) (
To adjust the generator:
1) Press the key SETUP (5) to call up the setup menu�
2) Tap the button "Monitor" on the left to call up the view for the
test signal generator and the monitor settings (fig� 27)�
3) When all settings have been made, press the key SETUP to exit
the setup menu�
Setup
Patch
Meter
FX
Scenes
Recorder
Monitor
Fig. 27 Test signal generator
☞
chapter 5�3�3�3)�
Oscillator
Type Off
White noise
Destination
Pink noise
Bus 1
Sine wave
Bus 2
Sine sweep
Bus 3
Level
Bus 4
Bus 5
−73.0 dB
Bus 6
Frequency Bus 7
Bus 8
1.00 kHz
L/R MIX OUTPUT
2019/08/23
X
07:50:01
Monitor/Phones
Clip Clip
+12 +12
Mute
0 0
Level
−12
0.0 dB
−24
−36
Solo
Clip
+12 +12
PFL
0 0
PFL Trim
−12 −12
−20.0 dB
−24 −24
−36 −36