Applications - IMG STAGELINE DELTA-160 Bedienungsanleitung

H.P
18
12 V DC
22
R MONITOR
23
Fig. 2 Rear side
12 Key M (MUTE) to mute the channel (key illuminated)
When the Send signals are assigned [key SENDS (13) illuminated]:
to establish a connection between the input channel and the bus
(key illuminated when a connection has been established)
13 Control keys
IN 1– 8 to call up the overview for the input channels IN 1– 8
IN 9 –20 to call up the overview for the input channels IN 9 –12,
ST 1, ST 2, USB and S/ PDIF
BUS 1– 8 to call up the overview for the signal buses BUS 1– 8
SENDS to call up or to exit the view for adjusting the Send
signals for the input channel or bus selected
14 Fader to set the volume of the stereo sum L / R MIX OUTPUT
To call up the sum channel view, press the key SEL on the left of
the fader�
The key SOLO is used to switch the stereo sum to the Solo bus�
The stereo sum will be automatically available at the Solo bus if the
SOLO function has not been selected for any other channel or bus�
The key M (MUTE) is used to mute the sum channel� When an
input channel and SENDS (13) have been selected, the key is used
to assign this channel to the stereo sum�
15 Combined input jacks MIC 1–12 for microphones (XLR) and audio
sources with line level (6�3 mm jack)
16 Stereo inputs ST 1 and ST 2 (balanced 6�3 mm jacks for audio sources
with line level)
17 Outputs OUT (XLR)
18 Headphone output H�P (6�3 mm stereo jack) to monitor a signal
via the Solo bus
19 Output for digital audio signals S / PDIF (RCA)
20 Input for digital audio signals S / PDIF (RCA)
21 Output for digital audio signals AES / EBU (XLR)
22 Power supply jack 12 V DC to connect the power supply unit pro-
vided; for strain relief of the connection, lead the cable around the
hook situated underneath the jack
23 Stereo output MONITOR (6�3 mm jacks, balanced) to connect, for
example, an amplifier system to monitor a signal via the Solo bus
8
2 1
3
S/ PDIF 16 ST 2
OUT IN
HU
19 20
L AES / EBU 8
1 2 1 2
3 3
21
15
7 6 5
2 1 2 1 2 1 2
3 3 3
16
15 14 ST 1 13
2
7 6 5
1 2 1 2 1 2 1
3 3 3
17

2 Applications

DELTA-160 is a versatile audio mixer with digital signal processing� It
offers 14 analog inputs: 12 mono inputs for microphones (which can
also be used for audio sources with line level) and 2 stereo inputs�
It also features a digital stereo input� The colour touch screen offers
an excellent overview of all settings, combined with intuitive control
options�
Additional features of the mixer:
– 8 balanced analog outputs, to be assigned as desired to the bus
signals or the sum signal
– digital output as S/ PDIF and AES/ EBU
– 4 mono signal buses
– 4 stereo signal buses
– headphone output and monitor output
– phantom power (48 V), to be activated individually for each micro-
phone input
– effect processor with 8 effect modules to be inserted into the input
channels, the signal buses or the stereo sum (graphic 31-band
equalizer, reverberation effects, echo effects, modulation effects)
– real-time analyzer as a tool to adjust the graphic equalizers
– test signal generator
– dynamic processor for each analog input channel
– adjustable high-pass filter for each input channel
– fully parametric 4-band equalizer for each input channel, signal bus
and the stereo sum
– crossover network to separate the signal for a subwoofer output
– signal delay adjustable for each mono input channel, each signal
bus and the stereo sum
– memory for equalizer settings, dynamic processor settings, effect
settings and scenes
– copy function for the settings of the input channels and signal buses
– stereo audio recorder with independent recording and replay (full
duplex) on USB storage devices
– USB wireless LAN adapter is supplied with the mixer (for remote
control via a mobile device)
An overview of all processing and assignment options is shown in
chapter 8�2� A block diagram showing a summary of all possibilities
of the mixer can be found on page 48�
4 3 2
1 2 1 2 1 2
3 3 3
15
12 11 10
1 2 1 2 1 2
3 3 3
4 3 2
2 1 2 1 2 1
3 3 3
1
1
MIC
3
9
1
MIC
3
1
2
OUT
3
27