Dispensing Of Beverages - Chocolate / Solubles; Dispensing Of Beverages - Hot Water - Faema Barcode New Touch Gebrauch Und Installation

11.3 Dispensing of beverages - Chocolate / Solubles

Preliminary operations
Place the cup (or cups) under dispenser (1) of the required
group.
Soluble beverage dispenser
Press the chocolate (or other soluble beverage) dispensing
button corresponding to the required dose. The led in the
selected button will come on and dispensing will begin.
Dispensing will stop automatically.
Beverage dispensing can be stopped before the set time
by pressing the same key again.
Mixed Soluble dispenser
Combined dispensing that can include coffee, milk and
solubles beverages.
Selection customization, with the sequence and duration
of the dispensing cycles for each beverage, is done by
the installer.
Insert the tube (40) into the milk container.
Press the mixed soluble dispensing button corresponding
to the required dose. The led in the selected button will
come on and dispensing will begin. Dispensing will stop
automatically.
Beverage dispensing can be stopped before the set time
by pressing the same key again.

11.4 Dispensing of beverages - hot water

Scalding hazard!
insulating devices to move the water and steam
wands.
HOT WATER: GENERAL INSTRUCTIONS
Place the appropriate container under the hot water
dispenser (14). Dispensing can be dosed automatically or
occur in continuous mode (manually).
Dispensing with automatic dosing
Press one of the hot water dispending keys (12dt) corre-
sponding to the desired dose.
The programmed dose of hot water will pour from the
dispenser (14) and will stop automatically.
Note Dispensing may be stopped by pressing the (12dt) key.
Pressing the (12dt) key does not change the parameters
set during the programming phase.
Manual dispensing
Press the hot water dispensing key (12c).
Hot water is dispensed continuously until the water key is
pressed again (12c) to stop it.
occur through the dispensing nozzle (1).
Use the appropriate
19 EN
40
NOTE: for dispensing very thick
chocolate, it is recommended to
remove the nozzle (5) and place the
tube directly on the mixer conveyor (3).
Hot water dispensing nozzle
1
5
12dt 12c
1
.
3