Faema Barcode New Touch Gebrauch Und Installation Seite 83

9) Remove the
remove the moving mechanisms inside the hopper;
10) Turn the
clockwise and remove the
11) Remove the worm screw (K) from the
(R);
12) Remove the solubles chute unit (S) turning it clockwise
13) Separate the solubles chute unit (S), lightly lifting it in
the indicated point.
Remove any soluble product remaining in the hopper.
Use a damp cloth to clean the hopper with products suitable
for objects that come in contact with foodstuffs. Carefully
rinse and dry, and remove any organic residues.
Before repositioning all the parts previously removed, make
sure all the wet or damp parts have been perfectly dried.
on the side (L) and
g (M) at the rear of the hopper
9
L
10
(Q);
11
K
12
S
13
31 EN
L
M
Q
R