Dispensing Of Beverages - Cappuccino / Milk; General Indications - Faema Barcode New Touch Gebrauch Und Installation

11.2 Dispensing of beverages - cappuccino / milk

GENERAL INDICATIONS

Milk is a delicate biological product and can easily
at a storage temperature no higher than 5°C (41°F) from
the moment the container is opened and throughout its
entire period of use. Our storage appliances are suitable
for this purpose.
NOTE: at the end of the work day (or not more than 24
hours from the time the container is opened), any remaining
milk must be discarded.
Preliminary operations
Insert the tube (40) of the dispenser (1) into the milk
container.
Place the cup (or cups) under the dispenser (1).
If necessary, adjust the dispenser height.
Cappuccino dispenser
Press the cappuccino dispensing button corresponding
to the required dose. The led in the selected button will
come on and dispensing will begin. Dispensing will stop
automatically.
Beverage dispensing can be stopped before the set time
by pressing the same key again.
Milk dispenser
Press the milk dispensing button corresponding to the
required dose. The led in the selected button will come
on and dispensing will begin. Dispensing will stop
automatically.
Beverage dispensing can be stopped before the set time
by pressing the same key again.
OPTIONS
The options indicated in section "Coffee dispensing" are
available.
The technician who installs the machine can also be asked
to personalize the cappuccino buttons in the following ways:
- milk dispensing before the coffee or vice versa (only when
cappuccino is dispensed);
Proceed as explained in section "CUSTOMER
PROGRAMMING" to obtain hot or tepid milk.
40
17 EN
1