Faema Barcode New Touch Gebrauch Und Installation Seite 75

Press the key
9
until the machine
an automatic washing
(approximately 2 minutes).
The message below will appear on
the display:
WASHING IN PROGRESS
12
Press the key
message below will appear on
the display:
WASHING IN PROGRESS
Do not remove the container during the
washing procedure: otherwise, the washing
cycle must be repeated.
Selection block - This occurs after 60' of functioning
from the preset time if the washing cycle has not taken
place, with the
by the installer.
and wait
10
The washing cycle has ended
performs
when this message appears on
cycle
the display:
START WASHING
Empty the container
with fresh water
insert milk pipe
as per instructions
The washing cycle has ended
13
; the
when this message appears on
the display:
WASH COMPLETED
MACHINE READY
function enabled (YES)
11
about 0.7 liters of cold water, leaving
the milk intake tube in the container:
14
from the container and reposition the
tube back into the milk container.
Press the key
the wash cycle screen and the RES
(24)
mode.
23 EN
Eliminate any remaining washing
solution in the container and add
Remove the washing container.
Remove the milk intake tube
to return to
key to return to normal work