Yamaha RX-V3900 Bedienungsanleitung Seite 96

Saving and recalling the system settings (System Memory)
Loading the system settings
Note
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the System Memory feature in advance.
■ Loading by the 7 SYSTEM MEMORY
buttons
You can recall the system settings stored in "Memory1" to
"Memory4" by pressing the corresponding 7SYSTEM
MEMORY buttons.
Press one of the 7SYSTEM MEMORY
1
buttons on the remote control to select the
desired memory number.
"Memory1 LOAD" (example) appears in the front
panel display.
SYSTEM MEMORY
1 2
y
"Empty" appears in the menu screen if no system settings
are stored in the selected memory number.
Press the selected 7 SYSTEM MEMORY
2
button once more to confirm the selection.
This unit loads the settings stored in the selected
memory number.
92
En
3 4
■ Loading by the GUI menu operation
1
Follow steps 1 to 4 in "Saving by the GUI
menu operation" (page 90).
2
Press 9k / n repeatedly to select "xxx Load"
and then press 9h.
"xxx" indicates the zone you selected in step 1.
3
Press 9k / n repeatedly to select the desired
memory number and then press 9 ENTER.
y
If the memory number you selected is empty, "Memory
Empty" appears.
4
Press 9k / n / l / h repeatedly to select
"LOAD" and then press 9 ENTER to load
the settings stored in the selected memory
number.
y
To cancel the operation and return to the previous menu,
select "CANCEL" and then press 9 ENTER.
Press I MENU to turn off the GUI menu.
5