Tv-Format - Yamaha RX-V3900 Bedienungsanleitung

Press GID repeatedly using a ballpoint pen or
similar object on the remote control to select the
desired remote control ID.
Each time you press GID, the remote control ID indicator
changes as shown below.
ID
y
To set the remote control ID of the simplified remote control,
see page 105 for details.
■ Tuner frequency step
(Asia and General models only)
Use this feature to set the tuner frequency step according
to the frequency spacing in your area.
Choice
AM10/ Select this setting for North, Central and South
America.
FM100
AM9/FM50
Select this setting for all other countries.
■ Bi-amplifier mode
Use this feature to activate or deactivate the bi-amplifier
function.
Choice
ON Select this setting if you want to activate the bi-
amplifier function.
OFF
Select this setting if you want to deactivate the bi-
amplifier function.
Note
When "BI-AMP" is set to "ON", the SURROUND BACK
terminals cannot be used to connect surround back speakers in
that the terminals are already used for the bi-amplifier
connection (page 14).
■ Recovery and backup of the system
settings
RECOV./BACKUP
Use this feature to save and restore the settings of this unit.
Choice
RECOVERY Restoring the saved setting of this unit.
BACKUP Saves the current settings of this unit.
CANCEL Cancels the recovery or backup of the settings of
this unit.
Notes
• This unit does not save the FM/AM preset stations, preset USB/
network items, and system memory settings.
• If no settings are saved, you cannot select "RECOVERY".
ID1
ID2
TUNER FRQ STEP
Descriptions
BI-AMP
Descriptions
Descriptions
■ Parameter initialization
Use this feature to reset the parameters of this unit to the
initial factory settings. You can select the category of
parameters to be initialized.
Choice
DSP Select this setting to initialize all the parameters of
the sound field parameters (page 69).
PARAM
VIDEO Select this setting to initialize all the parameters in
"Video" and "Display Set" (except "Short
Message" and "Playback Screen").
NETWORK Select this setting to initialize all the parameters in
"Network" and MusicCAST information stored in
this unit.
ALL Select this setting to initialize all the parameters of
this unit.
CANCEL
Select this setting to cancel the initialization
procedure.
y
To initialize the parameters of each sound field program, use
"Initialize" in "Stereo/Surround" (page 73).
■ MAC address filter
Use this feature to filter the access to this unit via LAN to
control this unit by the MAC address of the accessing PC
(page 94).
Choice
ON Only allows to accept the access from the PC
whose MAC address is registered to this unit.
OFF Allows to accept the access from any PC.
y
You can register the MAC address that is allowed to access
when "MAC FILTER" is set to "ON" by using the Web browser
(page 94).
■ TV format
TV FORMAT
Use this feature to set the color encoding format of your
television.
Choices: NTSC, PAL
Initial setting:
[U.S.A., Canada, General and Korea models]: NTSC
[Other models]: PAL
Advanced setup
INITIALIZE
Descriptions
MAC FILTER
Descriptions
111
En