Yamaha RX-V3900 Bedienungsanleitung Seite 89

Setup (Multi Zone)
Use this menu to set the functions of the multi-zone
configuration.
■ Zone SP Assign
(Zone speaker assignment)
Use this feature to assign the speaker terminals for Zone 2
and Zone 3.
1
Press 9k / n to select the speaker terminal
and then press 9l / h repeatedly to select
the desired zone of which you want to use
the speakers.
Zone SP Assign
Zone2 Set
Zone3 Set
M : Main zone
2 : Zone 2
3 : Zone 3
2
Press 9k / n to select "OK" and then press
9 ENTER to confirm the setting.
y
To return to the previous menu level without change,
select "CANCEL" in step 2.
■ Zone2 Set/Zone3 Set
(Zone 2/Zone 3 settings)
Zone2 Volume/Zone3 Volume
(Zone 2/Zone 3 volume)
Use this menu to select whether this unit controls the
volume level of the audio signals output at the ZONE
OUT (ZONE 2 or ZONE 3) jacks.
Choice
Fixed Select this setting when you want to control the
volume level of the selected zone on the external
amplifier. This unit fixes the ZONE OUT
(ZONE 2 or ZONE 3) volume level to a standard
line level.
Variable
Select this setting when you want to control the
volume level of the selected zone on this unit.
You can adjust the ZONE OUT (ZONE 2 or
ZONE 3) volume level simultaneously with
J VOLUME +/– on the remote control.
M 2 3
SP1
– 2 3
SP2
OK CANCEL
Zone :
SP Terminal :
Descriptions
Graphical user interface (GUI) menu
Note
When "Zone2 Volume" or "Zone3 Volume" is set to "Fixed",
you cannot select the following parameters:
– Zone2 Max Vol./Zone3 Max Vol.
– Zone2 Initial Vol./Zone3 Initial Vol.
Zone2 Max Vol./Zone3 Max Vol.
(Zone 2/Zone 3 Maximum volume setting)
Use this feature to set the maximum volume level in the
Zone 2 or Zone 3.
Control range: –30.0 dB to +15 .0 dB, +16.5 dB
Control step: 5.0 dB
Note
The "Zone2 Max Vol." or "Zone3 Max Vol." setting takes
priority over the "Zone2 Initial Vol." or "Zone3 Initial Vol."
setting.
Zone2 Initial Vol./Zone3 Initial Vol.
(Zone 2/Zone 3 initial volume setting)
Use this feature to set the volume level of Zone 2 or Zone
3 when the power of each zone is turned on.
Control range: Off, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB
Note
The "Zone2 Max Vol." or "Zone3 Max Vol." setting takes
priority over the "Zone2 Initial Vol." or "Zone3 Initial Vol."
setting.
Zone2 Balance/Zone3 Balance
(Zone 2/Zone 3 balance)
Use this feature to adjust the balance of the volume of the
left and right channels in each zone.
Choices: L10 to L1, 0, R1 to R10
Zone2 Tone Control/Zone3 Tone Control
(Zone 2/Zone 3 tone control)
Use this feature to adjust the balance of bass and treble
output to the selected zone.
Choices: Bass (Bass control), Treble (Treble control)
Control range: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB
Zone2 Muting Type/Zone3 Muting Type
(Zone 2/Zone 3 muting type)
Use this feature to adjust how much the mute function
reduces the output volume of the selected zone.
Choice
Full Mutes all the audio output.
–20dB Reduces the current volume by 20 dB.
–40dB Reduces the current volume by 40 dB.
Functions
85
En