Yamaha RX-V3900 Bedienungsanleitung Seite 68

Advanced sound configurations
■ Selecting decoders for multi-channel
sources
If you connected surround back speakers, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital EX
or DTS-ES decoders.
Set the operation mode selector to FAMP and
then press MEXTD SUR. on the remote control
repeatedly to switch between 5.1 and 6.1/7.1-
channel playback.
Choice
AUTO
Activates the optimum decoder to play back
signals in 6.1/7.1 channels when this unit
recognizes a signal flag being input.
Decoders Use this feature to activate the desired decoders
for the playback of multi-channel sources
(PLIIx Movie,
manually.
PLIIx Music,
EX/ES)
OFF
Does not use any decoders to create 6.1/7.1
channels.
y
Use this feature to activate the desired decoder manually when
this unit cannot detect the signal flag encoded to the input
sources correctly.
Notes
• The available decoders vary depending on the setting of the
speakers and the input sources.
• 6.1/7.1-channel playback is not possible in the following cases:
– when "Surround" (page 76) or "Surround Back" (page 76) is
set to "None".
– when the component connected to the MULTI CH INPUT
jacks is being played.
– when the source being played does not contain surround left
and right channel signals.
– when a Dolby Digital KARAOKE source is being played.
– when this unit is in the stereo playback, 7ch Enhancer
(page 45) or PURE DIRECT (page 47) mode.
– when "BI-AMP" is set to "ON" (page 111).
• If "EXTD Surround" is set to "Auto" (page 88), the decoder
mode is automatically set to "AUTO" every time this unit is
turned off.
64
En
Functions