Using The Enhanced Other Networks (Eon) Data Service; Displaying The Radio Data System Information - Yamaha RX-V3900 Bedienungsanleitung

Radio Data System tuning (U.K. and Europe models only)
Using the enhanced other
networks (EON) data service
Use this feature to receive the EON (enhanced other
networks) data service of the Radio Data System station
network. Once you select one of the 4 Radio Data System
program types (NEWS, AFFAIRS, INFO, or SPORT), this
unit automatically searches for all the available preset
stations that are scheduled to broadcast the EON data
service of the selected program type for a certain duration
of time. When the scheduled EON data service starts, this
unit automatically switches to the local station
broadcasting the EON data service and then switches back
to the national station once the EON data service ends.
Notes
• You can use this feature only when the EON data service is
available.
• The EON indicator lights up in the front panel display only
when the EON data service is being received from a Radio Data
System station.
1
Tune into the desired Radio Data System
broadcasting station.
2
Make sure the EON indicator is lit in the front
panel display.
If the EON indicator is not lit in the front panel
display, select another Radio Data System program so
that the EON indicator lights up.
3
Press AEON.
"EON" appears in the front panel display.
4
Press 9l / k / h / n repeatedly to select
one of the 4 Radio Data System program
types (NEWS, AFFAIRS, INFO or SPORT).
The name of the selected program type appears in the
front panel display.
5
Press 9ENTER to set the Radio Data
System program type.
y
• To cancel the selected program type, press 0EON again.
• To cancel the EON feature, select "EON OFF" at step 4.
52
En
Before performing the following operation, set the operation
mode selector on the remote control to FAMP.
Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time).
1
Tune into the desired Radio Data System
broadcasting station.
• We recommend using the automatic preset tuning
to tune into the Radio Data System broadcasting
stations (page 49).
• You can also use PTY SEEK mode to tune into the
desired Radio Data System broadcasting station
from the preset ones (page 51).
2
Press KINFO (or CINFO) repeatedly to select
the desired Radio Data System display mode.
PROG. SERVICE
Program service (PS).
PROGRAM TYPE
Program type (PTY).
RADIO TEXT
Radio text (RT).
CLOCK TIME
Clock time (CT).
DSP PROG. INFO
Sound field program.
INPUT INFO
Input source, channel number, channel name
Back to "PROG. SERVICE"