Yamaha RX-V3900 Bedienungsanleitung Seite 90

Graphical user interface (GUI) menu
■ Zone OSD (Zone on-screen display)
Use this feature to display the operational status of Zone 2
and Zone 3 on the Zone 2 video monitor connected to the
ZONE VIDEO jacks on the rear panel of this unit.
Choice
Off Turns off the zone on-screen display feature.
Zone2 Displays the operational status of Zone 2 only.
All Displays the operational status of Zone 2 and
Zone 3.
■ Zone Rename (Zone Rename)
Zone2 Rename/Zone 3 Rename
(Zone 2/Zone 3 rename)
Use this feature to edit the name of the selected zone.
1
Press 9 k / n / l / h to select a character or
function and then press 9ENTER to confirm
the selection.
Repeat step 1 until you input a name you want to use.
2
Press 9 k / n / l / h to select "OK" and then
press 9ENTER.
y
• To reset the name, select "RESET" and then press
9ENTER.
• To cancel the operation without change, select
"CANCEL" and then press 9ENTER.
Setup (Option)
This menu adjusts the optional system settings.
■ Memory Guard (Memory guard)
Use this feature to prevent accidental changes to sound
field program parameter values and other system settings.
Choice
Off Turns off the "Memory Guard" feature.
On Protects the following parameters:
– sound field program parameters
– GUI menu parameters
– speaker levels settings
y
When "Memory Guard" is set to "On", " " appears on the left
side of the name of a parameter being protected.
86
En
Functions
Functions
■ I/O Assignment
(Input/output assignment)
Use this feature to assign the input/output jacks according
to the component to be used if the initial settings of this
unit do not correspond to your needs. Change the
parameter to reassign the respective jacks and effectively
connect more components.
Once the input/output jacks are reassigned, you can select
the corresponding component by using the CINPUT
selector (or the input selector buttons (3)).
Example: Assigning the CD DIGITAL INPUT
COAXIAL jack to "MD/CD-R".
1
Press 9ENTER to display the "I/O
Assignment" screen.
Coax
In
PHONO
CD
1
TV
MD/CD-R
BD/HD DVD
DVD
2
2
Press 9k / n /l / h to select the cell in row
"MD/CD-R", column "Coax In" and then
press 9ENTER.
3
Press 9l / h to select "1" and then press
9ENTER.
Select "None" to clear the existing assignment.
y
To return to the previous screen without change, press
9k.
4
Press 9k / n /l / h to select "EXIT" and
then press 9ENTER.
y
You cannot select a specific item more than once for the
same type of jack.
■ Input Rename (Input rename)
Use this feature to change the name of the input source
that appears in the GUI screen and in the front panel
display.
1
Press 9k / n /l / h to select a character or
function and then press 9ENTER to
confirm the selection.
Repeat step 1 until you input a name you want to use.
2
Press 9k / n /l / h to select "OK" and then
press 9ENTER.
Opt Opt Comp HDMI
In Out In In
EXIT
4
8
5 A IN 1
6 B IN 2